Getting Started with DryClip®

Your guide to setting up DryClip, choosing your app settings, and caring for your sensor.

Get the app · Contact support

  • Fully charge DryClip before first use.

  • The DryClip app is available in the App Store and in Google Play.

  • Open the app and follow the on-screen steps to connect your device. If DryClip is not discovered in the app, tap DryClip sensor pad with your finger to wake it.

  • Attach DryClip to the lower front of a clean, dry diaper with the hook strip toward the top. The tape or hook strip grips directly to the diaper material—no second piece is needed. Put clothing on before arming.

  • You will receive a notification when a moisture or state-change event is detected.

Settings and Features

Make DryClip fit your routine. Explore sensitivity, alert preferences, and connection tips below.

  • DryClip allows you to adjust moisture sensitivity directly in the app.

    • Low — Reduced sensitivity for active movement or maximum battery life

    • Balanced — Recommended everyday setting for most families

    • High — Maximum moisture sensitivity for earlier detection

  • If your phone was out of range or Bluetooth was temporarily unavailable, DryClip can retry advertising after moisture is detected so the alert still arrives.

    Retry intervals can be adjusted in the app:

    • Off

    • Every 5 minutes

    • Every 10 minutes

    • Every 20 minutes

    • Every 30 minutes

  • This is important and actually very cool technology-wise.

    DryClip is designed to conserve battery life by remaining in a low-power sleep state whenever possible.

    When armed, DryClip enters monitoring mode and wakes only when needed to detect moisture events and communicate with the app.

    Re-arming after a diaper change resets monitoring and helps maximize battery life between charges.

  • Choose when you would like to be notified after moisture is detected.

    Notification timing can be adjusted in the app depending on your preferences and usage needs.

  • The DryClip app stores recent monitoring activity and wet event history directly in the app.

    Trends may include:

    • Recent wet events

    • Monitoring sessions

    • Device activity

    • Battery level history

  • Enable notifications to receive moisture alerts instantly on your phone.

    A test notification can be sent directly from the app to verify notification settings are working properly.

  • For best performance:

    • Keep Bluetooth enabled

    • Allow notifications

    • Keep DryClip charged

    • Re-arm after each diaper change

  • DryClip does not record audio or video.

    Monitoring data remains associated with your app experience and connected device.

DryClip™ is not intended to diagnose, treat, cure, or prevent medical conditions.

Safety & Care

Keep these essentials in mind whenever you use, charge, or store your DryClip.

  • DryClip is intended for external diaper moisture monitoring only.

    DryClip is not intended to diagnose, treat, cure, or prevent medical conditions.

  • • Charge DryClip using a standard USB-C cable

    • Use only low-voltage USB power sources

    • Do not charge while damaged or wet

    • Disconnect from power after charging is complete

    • Do not puncture, crush, or expose DryClip to extreme heat

    If the enclosure becomes damaged, discontinue use immediately.

  • DryClip is designed for diaper moisture detection but is not intended for full water submersion.

  • For best performance:

    • Attach DryClip to the lower front of a dry diaper

    • Apply clothing over the diaper to help keep DryClip in place

    • Re-arm DryClip after each diaper change

  • DryClip contains small electronic components and is not a toy.

    • Keep out of reach of children when not attached

    • Do not allow chewing or biting

    • Inspect the device regularly for damage

    Discontinue use if:

    • enclosure cracks

    • device opens

    • battery swelling occurs

    • excessive heat is noticed

  • Store DryClip in a cool, dry location.

    Avoid:

    • direct sunlight

    • extreme temperatures

    • prolonged humidity exposure

    Clean only with a soft, dry cloth.

  • DryClip relies on:

    • Bluetooth connectivity

    • phone notification settings

    • battery charge level

    Notification delivery may vary depending on phone settings, distance, or environmental conditions.